jdm_brett Posted November 23, 2018 Report Posted November 23, 2018 Hi, i have a query on the pin outs for the Nissan NGTR+ plug and play for me its not been very plug and play ( my own fault ) i have an r33gtst running on a modified apexi gtr ecu and custom wiring previously my own ms3x on the Link pdf / installation booklet i notice there are pins that are unlisted eg, pins 5, 8, 10...56, 57 are they connected to anything ecu side? are they just dead ends once they get through the header? cheers is there a more detailed pin out, listing every pin including the missing ones? cheers ps excellent forum, this is my first post but i have read countless posts that have answered questions that have already been asked cheers Quote
Brad Burnett Posted November 23, 2018 Report Posted November 23, 2018 You will need to get with Simon or Adam for what you are after. They may have their own internal documents for the pinouts that are much more detailed. Quote
Adamw Posted November 24, 2018 Report Posted November 24, 2018 We typically only publish the user configurable stuff as that is all an end user should need with a plug-in ecu that is designed to work with a factory loom. As Brad says, if anyone needs more info for troubleshooting etc they should get in touch with Link Tech support. I have PM'ed you a bit more detail. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.