Craig Posted March 5, 2019 Report Share Posted March 5, 2019 Hello new to this just wanting to know if some can tell any tips for wiring in a monsoon to a starlet ep91 fitted with a 4efte out of a ep82 gt starlet. Has anyone ever used this in this configuration before? Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 5, 2019 Report Share Posted March 5, 2019 This thread may have some info if you havent seen it: Quote Link to comment Share on other sites More sharing options...
Craig Posted March 5, 2019 Author Report Share Posted March 5, 2019 Thanks for that the tps is different between the ep91 and ep82 Quote Link to comment Share on other sites More sharing options...
RFish Posted March 8, 2019 Report Share Posted March 8, 2019 On 3/5/2019 at 9:25 AM, Craig said: Thanks for that the tps is different between the ep91 and ep82 TPS works in the same way i.e switch type on/off. You can use the TPS off the Auto's (4 pin) or from a R32/33GTR Quote Link to comment Share on other sites More sharing options...
Knox Posted January 4, 2021 Report Share Posted January 4, 2021 On 3/5/2019 at 10:48 AM, Adamw said: This thread may have some info if you havent seen it: Hi, I’m wiring a link monsoon x to ep92 startlet with 4efte engine. There is 24 tooth for crank sensor and 2 tooth for cam sensor on oem trigger sustem. Am I need to cut/shave one of the cam tooth? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 4, 2021 Report Share Posted January 4, 2021 How sure are you there are two sync teeth? I have never seen one with two sync teeth, only usually a single tooth but two sensors. All the pics I can find on google only have a single tooth. If you have two sync teeth, then yes you will need to remove one. Quote Link to comment Share on other sites More sharing options...
Knox Posted January 4, 2021 Report Share Posted January 4, 2021 31 minutes ago, Adamw said: How sure are you there are two sync teeth? I have never seen one with two sync teeth, only usually a single tooth but two sensors. All the pics I can find on google only have a single tooth. If you have two sync teeth, then yes you will need to remove one. I'm sorry my mistake, there is two sensor and one sync teeth. Is it an issue ? Because I think it will read 2 times in 360 degrees ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 4, 2021 Report Share Posted January 4, 2021 You only connect one of the sync sensors to trigger 2, either one is fine but most use the G1 sensor. Knox 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.