iceman Posted March 18, 2019 Report Share Posted March 18, 2019 Hi, Suspect I am working from incorrect map calibration data on a G4 Storm Black. The drop down "map sensor type" in AN Volt 1-Map Sensor menu doesn't actually list the Link 2.5bar map sensor I'm using. The first choice just says "2.5bar", next possible choice further down is "Bosch 2.5bar" then 5 Link sensors at the bottom of the list ranging from 1.15bar to 6.5bar but no 2.5bar.... Is there an equivalent calibration within the model list or do I manually input the data on a cal table? Cheers. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 19, 2019 Report Share Posted March 19, 2019 Yep, the 2.5bar at the top of the list is the correct one. Quote Link to comment Share on other sites More sharing options...
iceman Posted March 19, 2019 Author Report Share Posted March 19, 2019 Thanks Adam. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.