Jump to content

evo_gerard

Members
  • Posts

    45
  • Joined

  • Last visited

  • Days Won

    1

Reputation Activity

  1. Like
    evo_gerard reacted to Vaughan in Fury G4+ and Razor PDM   
    Yes you need to use lowercase at the moment, I have brought this up previously and there is a ticket in the system to make it not care about upper vs lower case and this should be fixed in the next release.
  2. Like
    evo_gerard got a reaction from Vaughan in Fury G4+ and Razor PDM   
    thanks @Vaughan I'm gonna try it today. will give feedback
     
  3. Like
    evo_gerard reacted to Adamw in Link G4X ecu and MXS strada dash questions   
    The sensors are wired in series with just a single wire going back to the dash.  As far as I know both sensors are the same, so measure 1 and double it.  
  4. Like
    evo_gerard reacted to Adamw in The A / F becomes lean after restarting.   
    If IAT is not the cause of your issue then the other common cause of lean hot restart is due to the injectors getting hot since they are sitting in a very hot environment and attached to a hot cylinder head, with very hot intake valves right underneath them and without the usual fuel flowing through them to keep them cool. 
    The way to work around this is to use a 3D IAT trim table with IAT Vs engine runtime on the axes.  Then at hot IAT's you can add say an extra 15% fuel at initial startup and fade it out over say 2 mins.  

  5. Like
    evo_gerard got a reaction from INSW20 in Lean cut engine protection   
  6. Like
    evo_gerard got a reaction from MarcusP in Lean cut engine protection   
×
×
  • Create New...