orlando bello

There is a co2 boost control topic on the forum the guy saying that he got it to work fine .have request more information but he never replied.

Hello guys I want to know If a link g4+ storm on a chevy ls1 engine will be able to run the single wire alternator as oem it's going strait to the pcm Gen terminals L.

Ok will try thanks

Hello Adam I can upload any more log or scoop my attachments is full.

Hello guys I'm back on this topic because it's my second install with the monsoon g4x and have same trigger error issue this time with a 4age 20v 24+1 tooth dizzy.it only happen in idle .have try many threshold voltage and filter combination .even close the air gap of the trigger 1 .have install a g4+ storm for more than 5min in idle not trigger errors at all that only the g4x will shut Down when it captures trigger errors. Andy body else have this situation that is very frustrating. I do have one more monsoon g4x to install and aim 100% sure I will be running in same issue. Need to solve this asap.one more thing I have capture 3 different scoop from the link storm g4+ 0 rpm 1000rpm and 2000rpm and put those threshold values in the g4x still trowing errors.

Hello Guys I have notice this situation when connect to laptop g4x it connect very fast ,but the software screen freezes for more than 1 min sometime ,its green on top but if you want to start scroll to the menu and layouts it nothing happen just froze every time you connect .any body experience this or could be my laptop.??

Thanks Adam will start working on it.

Adam witch pwm function in link ecu I need to use to work for this MIT module or how do I set it up in link ecu .thanks.

Thanks for the info will try it out ,the fuel pump pull 10amp.after the rebuild.

Hello guys I have a MIT evo8 fan module .I want to know If I can use it to control my magnafuel 750 external fuel pump.i have it on a relay but those pump over heat very fast and .my idea is to let the fan module activate the fuel pump on a lower speed and under condition good on high speed. Link g4+ extreme ecu.

Latest firmware release last week.

Have not downloaded the map yet but those Errors I dont have but the latest firmware will take care of those error code.

Hello guys my Attachment i 99% full how do I delete them or what i need to do to get more space to post more pic on the forum.

Hello Paschalis sorry to be in your post ,but I want to ask you if you had any trigger errors issues as i have done a 4efte also and experience trigger error headaches specially in idle rpm range.link monsoon g4x ecu.

Tested a other Dizzy today and still the same situation. Going to chk the voltage tomorrow from the dizzy with a Scoop to and record voltage. And hope for a solution soon.

Yes Adam they are like the setting .like you mentioned. I have sent a trigger scoop from a link storm in at tech support. Simon or David should have it.

Hello guys Any body have experience this trigger error situation on a Toyota 24+1 dizzy .voltage threshold values from the help file don't work with my current setup voltage are to high dont work. I have try many filters combination and lowering the threshold values from 3000rpm to 0 rpm .car fire up fine but in idle it quit and loose trigger 1.its a G4x monsoon. Any help will be gr8 .

Yes Adam its running I was able to do 3 wot pull on dyno to day all nice. The engine shut down again after a wot dyno pull.guess need a bit more work on the threshold voltage.

Hello guys it's my first G4x and it's on Moddel fuel set up. I want know what this mean and how to fix it.i just start to roll the car on the dyno today .Fuel calculation clamp at its minimum value .Please chk fuel settings. Show in red of the screen.

Would like to say thanks to David link sort out the trigger error counter issue .notice big difference between the link g4+ voltage threshold on the Toyota dizzy.did not like much that when error counter is present that the engine shut down and you have to turn ignition switch all the way of for the engine to fire up again.

Simon thanks to for the post .what you guys think for a solution as I have 2 more Toyota to do this week all same dizzy.

Adam I will try that out of my head I think I have try those values but will try again.this is the first one and I have 2 more Toyota to do I hope there is a solution for this situation. Simon at link ecu have the map maybe he can e-mail it to you .if you want to take a look . Adam those value I have start with from a Mr2 plug in ecu.that mean I should have the same issue still.not at the shop now any more.

When install a wide band analog or Can base I won't remove it as you can use the Close loop lambda function.

Been trying to upload the map but its dont compress that low .until now The engine fire up fine and when idle it dies when I look in the runtime there is a trigger error reported when engine quit. Ignition switch still on i crank again no rpm signal. I have to turn the ignition switch back off completely and back on to start the engine will fire up again .notice if the engine idle abov 1500rpm it won't quite. Or shut down .I have try many threshold voltage with no luck jet. I do have a g4+ atom as well no issues at all .even with 1 or 2 trigger errors.