Ragnar Posted June 26, 2019 Report Share Posted June 26, 2019 Hello dear’s I follow your instructions for how to wire the injectors and it works perfect but i have another problem, the boost solenoid valve ( mac 3 ) is running ( clicking) while it’s off from the Ecu, even when i switch between aux5 and aux8 and the clicking increase with the RPM is it a wiring issue? also, the tachometer is not working? I have a nissan Altima 92 and i wire the tacho on aux1 but nothing happened?! Really thanks for your continued support Quote Link to comment Share on other sites More sharing options...
Ragnar Posted June 27, 2019 Author Report Share Posted June 27, 2019 Guys anything?? Quote Link to comment Share on other sites More sharing options...
Simon Posted June 27, 2019 Report Share Posted June 27, 2019 Can you post a copy of your map so we can see how you have things set up. Quote Link to comment Share on other sites More sharing options...
Amer A Hbahbeh Posted June 28, 2019 Report Share Posted June 28, 2019 Hello Simon Sorry for being late, Sure. Thanks Mate. altima map 2.pcl Quote Link to comment Share on other sites More sharing options...
Adamw Posted June 29, 2019 Report Share Posted June 29, 2019 The tacho is not working because you have both aux 1 and aux 5 assigned to tacho. Turn off whichever one you are not using. The Boost valve is not working correctly probably because aux 6 & 7 are still set to ISC stepper drive, when in stepper mode aux 5-8 are all sequenced together. Turn aux 6 & 7 off. Quote Link to comment Share on other sites More sharing options...
Ragnar Posted June 29, 2019 Author Report Share Posted June 29, 2019 Hello Adam I didn’t know that, I will give it a try and back to you. But for the tacho, is their any additional setup or just wire and assign and that’s it ? Thanks Quote Link to comment Share on other sites More sharing options...
Simon Posted July 1, 2019 Report Share Posted July 1, 2019 Wire to correct pin and then configure. There are a couple of additional settings but the defaults are normally fine. Quote Link to comment Share on other sites More sharing options...
Ragnar Posted July 9, 2019 Author Report Share Posted July 9, 2019 Hi again The boost solenoid work perfect, thanks adam. but for the tacho, i turn off the unused one, but didn’t work i try to play with the figures, also nothing Simon & adam : appropriate you continues support Quote Link to comment Share on other sites More sharing options...
Simon Posted July 9, 2019 Report Share Posted July 9, 2019 Is it a stock tach? Was it originally driven from an ECU Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.