driftma Posted September 17, 2019 Report Share Posted September 17, 2019 Hello, Seeing as it looking like Link ECU japan now has a PNP version of the JZX100 ECU available does that mean that there will be a base setup available in the base maps folder some time soon? Quote Link to comment Share on other sites More sharing options...
Simon Posted September 17, 2019 Report Share Posted September 17, 2019 Once we have released it globally there will be in the next PC link release. Japan are doing the testing for us. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 18, 2019 Report Share Posted September 18, 2019 There is one of my 1JZ base maps in this thread: Quote Link to comment Share on other sites More sharing options...
louis19 Posted September 19, 2019 Report Share Posted September 19, 2019 22 hours ago, Adamw said: There is one of my 1JZ base maps in this thread: Hi Adamw, Would this map be suitable for a JZX100 running on a link kurofune G4+? My wiring guy is currently looking for a base file just to cut down some time. Thank you Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 19, 2019 Report Share Posted September 19, 2019 44 minutes ago, louis19 said: Hi Adamw, Would this map be suitable for a JZX100 running on a link kurofune G4+? My wiring guy is currently looking for a base file just to cut down some time. Thank you Yes. Load it into your (live) kurofune and all the Kurofune features will be assigned. You will then need to re-assign any inputs and outputs that dont match your wiring and if you are using an HKS adapter loom you will need to change the firing order to 123456. Quote Link to comment Share on other sites More sharing options...
louis19 Posted September 19, 2019 Report Share Posted September 19, 2019 50 minutes ago, Adamw said: Yes. Load it into your (live) kurofune and all the Kurofune features will be assigned. You will then need to re-assign any inputs and outputs that dont match your wiring and if you are using an HKS adapter loom you will need to change the firing order to 123456. Thanks for the quick response mate! Would you be able to point us in the best location for wiring in the MAP sensor and flex fuel sensor? Is there any preference here? Can we wire into some of the unused factory plugs that run back to the ecu for signal wires like the MAF sensor which will now be replaced by the MAP sensor etc. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 19, 2019 Report Share Posted September 19, 2019 MAF is normally connected to pins 21 or 9 in the HKS looms. Some of their looms have a seperate MAP plug already there but Im not sure about the JZX loom. There is unlikely an existing unused wire for the flex sensor, you can connect that to any DI from 1-8. Quote Link to comment Share on other sites More sharing options...
Purpleline Posted December 13, 2019 Report Share Posted December 13, 2019 Just wonder if the T1JZ offered in Japan will be avalible for order? we have dealer here in HK but I want to confirm he can get it fm LINK. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.