Lewis e60 2jz Posted April 18, 2020 Report Share Posted April 18, 2020 Hi bear with me . It may have already been covered . But can’t find a topic on it. trying to keep the use of stock tacho . the bmw e60 uses CANBUS H & L for the clocks. I see on B LOOM it has CAN 2 H & CAN 2 L. is it a case of wiring can h and can l from bmw loom to output on link ?? any help or advice about it would be greatly appreciated . Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted April 18, 2020 Report Share Posted April 18, 2020 Yes B loom has CAN 2 high and low. you can make connection there and set CAN 2 to I believe the Mini Cooper Generic Bus and should be able to get the standard data for the gauge cluster working. Quote Link to comment Share on other sites More sharing options...
Lewis e60 2jz Posted April 18, 2020 Author Report Share Posted April 18, 2020 Thanks for your reply mate . ill have a look now .. the Mini Cooper bus you speck of is it in a drop down menu when selecting on the canbus screen ? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 18, 2020 Report Share Posted April 18, 2020 Yes the Mini CAN is in the dropdown list but I suspect it wont work in that car, worth a try though. You could also try intergale8v's E87 settings or my E90 "guess" in this thread: Quote Link to comment Share on other sites More sharing options...
Lewis e60 2jz Posted April 19, 2020 Author Report Share Posted April 19, 2020 Thanks the e90 I reckon would be more similar . Will defo give that a try Quote Link to comment Share on other sites More sharing options...
Lewis e60 2jz Posted April 19, 2020 Author Report Share Posted April 19, 2020 All sorted thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.