Invecii Posted August 20, 2020 Report Share Posted August 20, 2020 Hi Dose any one can help me to solve the OBD2 Vehicle speed problem? I have an OBD2 gauge and it can display most parameters from Link G4+ ,but vehicle speed was not outputted to OBD2 gauge. I use a DI to be my driven wheel speed source and the speed can display in my PCLink software, is there any way can output speed to my OBD2 gauge? Thanks. Quote Link to comment Share on other sites More sharing options...
dx4picco Posted August 20, 2020 Report Share Posted August 20, 2020 Do you have your driven and undriven wheel speed defined in chassis and body? If not you may want to set this up Quote Link to comment Share on other sites More sharing options...
Invecii Posted August 20, 2020 Author Report Share Posted August 20, 2020 Yes, I have set both of them in the PCLINK software, I also try another brand OBD2 gauge or Bluetooth OBD2 adapter with APP but nothing help. Quote Link to comment Share on other sites More sharing options...
dx4picco Posted August 21, 2020 Report Share Posted August 21, 2020 I guess we need to know what speed signal is wanted for your obd gauge. I remember reading something similar with a haltech dash, it is looking for "vehicle speed" in the stream, but link doesn't use it that way, only the 4 wheels and driven/undriven. It can be changed in the haltech dash to look for driven wheel speed for example. Or the issue is somewhere else. Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 21, 2020 Report Share Posted August 21, 2020 can you attach your tune, I will test it here. Quote Link to comment Share on other sites More sharing options...
Invecii Posted August 22, 2020 Author Report Share Posted August 22, 2020 On 8/21/2020 at 3:49 PM, Adamw said: can you attach your tune, I will test it here. Hi Adamw Please see the attached file, thanks.OBD issue.pclr Quote Link to comment Share on other sites More sharing options...
Invecii Posted August 26, 2020 Author Report Share Posted August 26, 2020 Hi Adamw Any luck from your side? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 26, 2020 Report Share Posted August 26, 2020 Yes, works fine for me. This is your map loaded into an Xtreme, same firmware as you are running. OBD socket wired to CAN2, PLX kiwi dongle plugged in to OBD socket. Tested with 3 apps; Realdash on windows, OBD dash.Lite on windows, Torque Lite on Android. Quote Link to comment Share on other sites More sharing options...
Invecii Posted August 27, 2020 Author Report Share Posted August 27, 2020 Thanks Adamw. I will try it again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.