Injector flow correction in percent

[remski2]

Hi.

I just got my injectors cleaned and I wanted to correct the ~1% discrepancy with a Fuel Trim Table.

Assuming I want to add a 1% to FuelTrimCylinder#4 Table... from 3-10ms pulse width. 

The trim table goes only up to 75.. so what am I adding here.. % overall, % of fuel table itself ?

Fuel table goes up to 150 so this looks like an arbitrary number yet it says "Fuel table 1(%)"

Fuel equation mode is Traditional.

 

Thank you.

Remski

[remski2]

Re-reading the manual 5times and switching to "single" instead of "table" made me realize that there is no other way, other than read the current cell and add X%

 

[Adamw]

If you want to add 1% fuel, put a 1 in the trim table.  

[koracing]

What Adam said. The trim tables are percent adders - zero adds nothing, and you can add up to 75% or subtract up to 50% from the commanded fuel from the primary fuel table with the individual cylinder correction tables.  Single value method you can add or subract up to 50%.