nachollamg Posted April 2, 2021 Report Share Posted April 2, 2021 Hello, I would like to know if XtremmeX have CAN port connector-cable included in the box or I should buy It alone. In addition, reading G4x manual, I can see there is a gnd pin. Do I need to pin this output somewhere in the AIM PDM or It just enough with connecting Can1H from ECU to CAN1H PDM and Can1L from ECU to CAN1L PDM ? Thank you Quote Link to comment Share on other sites More sharing options...
dx4picco Posted April 2, 2021 Report Share Posted April 2, 2021 To my knowledge ECUs are only delivered with a tuning cable. extras like can plugs are not included. To physically link your pdm to the ECU it is as simple as linking both CAN H together and CAN L respectively. Depending on what you want to acheive, the most difficult part is going to be the communication protocol in the software, but most of the time @Adamw is there to help Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 2, 2021 Report Share Posted April 2, 2021 The Xtreme also has CAN2 on the main B connector. Generally this is the easiest as the loom comes with wires already pinned in those holes. Quote Link to comment Share on other sites More sharing options...
punyaphat phimchan Posted April 27 Report Share Posted April 27 hi @Adamw i have a question i have vipec i44 can i make tuning cable by myself and can wiring to obd ii port to connect a zd gauge Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.