shinty Posted July 18, 2022 Report Share Posted July 18, 2022 hello everyone! I bought a plug-in this time and set it up, but the air conditioner alone doesn't work. With the AC clutch setting, the clutch operates with PC LINK, but ON / OFF with the AC button on the air conditioner panel does not work at all. Electricity is coming to the AC button, and the wiring is also connected. Are there any other settings? I have been suffering from this problem for a few days. please help me. please Quote Link to comment Share on other sites More sharing options...
joeshaw123 Posted July 20, 2022 Report Share Posted July 20, 2022 Have you gone to coil on plug by any chance? Does your tacho work ok? Quote Link to comment Share on other sites More sharing options...
shinty Posted July 21, 2022 Author Report Share Posted July 21, 2022 14時間前、joeshaw123は言った。 ひょっとしてコイルオンプラグに行きましたか?あなたのタチョは大丈夫ですか? Thank you for your reply. I'm sorry I don't know what the coil-on plug shows. The octopus is working fine. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 21, 2022 Report Share Posted July 21, 2022 Have you configured the AC request digital input in PCLink? Sometimes you may have to verify that the DI is functioning as it should and may have to adjust a pullup resistor setting for it to work correctly. Quote Link to comment Share on other sites More sharing options...
shinty Posted July 21, 2022 Author Report Share Posted July 21, 2022 7分前、ブラッド・バーネットは言った。 PCLinkでACリクエストデジタル入力を設定しましたか?場合によっては、DIが正常に機能していることを確認する必要があり、正しく動作するようにプルアップ抵抗の設定を調整する必要があるかもしれません。 Thank you for your reply. I have set the input of the request to DI, but I do not know how to see if the signal is coming. Which option do you choose to set the pull-up resistor? thank you ちょうど今、シンティは言った: お返事ありがとうございます。リクエストの入力をDIに設定しましたが、信号が来ているかどうかを確認する方法がわかりません。プルアップ抵抗を設定するには、どのオプションを選択しますか?ありがとうございます I confirmed that all the wiring of the connector was correct. The ac request is in DI6. Quote Link to comment Share on other sites More sharing options...
shinty Posted July 21, 2022 Author Report Share Posted July 21, 2022 17 hours ago, joeshaw123 said: Have you gone to coil on plug by any chance? Does your tacho work ok? I understand the coil on plug! With independent ignition, the octopus is moving without problems. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 21, 2022 Report Share Posted July 21, 2022 6 hours ago, shinty said: Thank you for your reply. I have set the input of the request to DI, but I do not know how to see if the signal is coming. Which option do you choose to set the pull-up resistor? thank you you can view the status of the digital inputs in the runtime value list by pressing f12 and scrolling left or right to the Digital inputs tab Quote Link to comment Share on other sites More sharing options...
shinty Posted July 22, 2022 Author Report Share Posted July 22, 2022 10時間前、ブラッド・バーネットは言った。 f12を押してデジタル入力タブまで左右にスクロールすると、ランタイム値リストでデジタル入力のステータスを表示できます。 Thank you very much! I looked at the status, but it was all 0 ... The wiring is definitely connected, but ... Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 22, 2022 Report Share Posted July 22, 2022 AC Request shows active in your screenshot. Does your AC clutch work if you set Aux 3 to test mode? Quote Link to comment Share on other sites More sharing options...
shinty Posted July 22, 2022 Author Report Share Posted July 22, 2022 17分前、アダムは言った。 ACリクエストはスクリーンショットでアクティブに表示されています。 Aux 3をテストモードに設定すると、ACクラッチは機能しますか? Hello Adam In the test of the AC clutch sent by the screenshot, AC is turned on and cold air comes out properly. However, even if the request and the AC clutch are active, the air conditioner will work regardless of whether the AC switch on the air conditioner panel is pressed or not. 20分前、アダムは言った。 ACリクエストはスクリーンショットでアクティブに表示されています。 Aux 3をテストモードに設定すると、ACクラッチは機能しますか? To put it simply, AC works with a PC link, but the AC switch on the air conditioner panel does not work at all. The AC switch is energized and the lamp is lit properly. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 22, 2022 Report Share Posted July 22, 2022 2 minutes ago, shinty said: However, even if the request and the AC clutch are active, the air conditioner will work regardless of whether the AC switch on the air conditioner panel is pressed or not. But if the ECU shows "AC Request Active", then AC Clutch should be active. Can you give us a log of the engine running and switch the AC switch on/off. Quote Link to comment Share on other sites More sharing options...
shinty Posted July 22, 2022 Author Report Share Posted July 22, 2022 22分前、アダムは言った。 ACリクエストはスクリーンショットでアクティブに表示されています。 Aux 3をテストモードに設定すると、ACクラッチは機能しますか? I tried various methods on the AC clutch control screen. I tried turning the pull-up on, setting the operating state to low or high, and setting the ON level to low or high, but under no circumstances I could not turn it on or off with the AC switch on the air conditioner panel. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 22, 2022 Report Share Posted July 22, 2022 14 minutes ago, shinty said: I could not turn it on or off with the AC switch on the air conditioner panel. But DI6 is showing as "active" in your screenshot above. Quote Link to comment Share on other sites More sharing options...
shinty Posted July 22, 2022 Author Report Share Posted July 22, 2022 35分前、アダムは言った。 しかし、上のスクリーンショットでは、DI6は「アクティブ」と表示されています。 Even if you don't press the AC switch, if you set the drive type to low or high, it will become active ... Once you set the clutch to be engaged, you will not be able to disconnect the AC clutch unless you connect it to the PC link. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 22, 2022 Report Share Posted July 22, 2022 What I am asking is if DI6 turns on and off with your AC switch or not? Quote Link to comment Share on other sites More sharing options...
shinty Posted July 23, 2022 Author Report Share Posted July 23, 2022 14 hours ago, Adamw said: What I am asking is if DI6 turns on and off with your AC switch or not? Adam I'm sorry I didn't understand the meaning. DI6 cannot be turned on / off with the AC switch ... Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 24, 2022 Report Share Posted July 24, 2022 You might be best to contact Link Japan so they can help in your native language. Quote Link to comment Share on other sites More sharing options...
shinty Posted July 24, 2022 Author Report Share Posted July 24, 2022 3時間前、アダムは言った。 リンクジャパンに連絡して、母国語で助けてもらうのが最善かもしれません。 Hello Adam Thank you for your kindness. If you have any questions, I would be grateful if you could help me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.