Sam7 Posted July 25, 2022 Report Share Posted July 25, 2022 I have a 4AGE currently running an Atom G4+ that I'm intending to upgrade to a Fury G4X. It's currently configured to run wasted spark and as part of the upgrade I'm intending to change to COP and sequential. Ideally I'd like not to run the distributor so I'm looking for ideas to provide a sync signal with the distributor deleted. I've seen a few discussions regarding reading a cam lobe. I guess it might also be possible to read a magnet in the cam wheel although access to the back of the cam wheel would be pretty difficult given the cam cover design so the sensor would probably have to be mounted in the front. I understand that the G4X ecu's can also use a vacuum sensor from one of the intake runners. That sounds like an option that won't require too much engineering but I'm wondering how reliable it would be given the engine runs a plenum rather than itb's. Has anyone tried something similar and did you find that worked? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 25, 2022 Report Share Posted July 25, 2022 MAP sync with a 4 Cyl even fire engine needs to be from a single port with ITB's. For the sync it is common to keep just the distributor base with a billet cap or similar to cover it. You you could possibly use some of the distributor body & drive system to make something much more compact. For example like this MSD one that uses a distributor "stalk" with a sensor pointing at a magnet in the shaft. Or maybe something like this 2JZ kit: Quote Link to comment Share on other sites More sharing options...
Sam7 Posted July 26, 2022 Author Report Share Posted July 26, 2022 Thanks Adam, that gives me some possibilities. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 27, 2022 Report Share Posted July 27, 2022 You can also use the small port or GZE dizzy that has a 24 tooth wheel as well as a single tooth for sync. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.