Mikeboosty Posted October 1, 2022 Report Share Posted October 1, 2022 finally got my car running to drive but under load im at 8.8 AFR and off throttle on decel is like 11.5-13.5 thats across everything right now, the motor currently has like 11 miles so thats why i have rev limit set to 3500 THE basemap.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 2, 2022 Report Share Posted October 2, 2022 What is the question? Quote Link to comment Share on other sites More sharing options...
Mikeboosty Posted October 3, 2022 Author Report Share Posted October 3, 2022 sorry guess I wasnt clear, how do I raise afrs across the board so Im not about to wash my cylinder walls out. I messed with the injector max pulse width and it now idles around high nines to 10s, while loaded depending on the situation 9.8-11.5 afr. I tried messing with the fuel table a bit but every single time I mess with a cell the car starts running in a different one. This is on 93 octane Quote Link to comment Share on other sites More sharing options...
Confused Posted October 3, 2022 Report Share Posted October 3, 2022 The configuration supplied is only supposed to get you basically up and running - tweak the Master Fuel value until it's closer to 14.7 at idle, this should allow you to drive it onto a trailer/transporter, off the other end, and onto your tuner's dyno. Adamw 1 Quote Link to comment Share on other sites More sharing options...
Mikeboosty Posted October 3, 2022 Author Report Share Posted October 3, 2022 ah, got it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.