Beedub Drift Posted April 25, 2023 Report Share Posted April 25, 2023 Gidday team, seeking a base map to suit a bone stock LS1 Gen4 5700cc. (It does have a B12 Kelford Cam in it too, for bonus points) Just needing it to idle to check all potential leaks and issue pre dyno tuning. Will take a bone stock tune if available! Quote Link to comment Share on other sites More sharing options...
koracing Posted May 2, 2023 Report Share Posted May 2, 2023 I would say take any base tune in the base maps and set the parameters to match the engine your using and how it's wired for inputs and outputs and give it a go. I'm not sure how much help you're going to get without knowing how you've got everything set up on the motor or wired into the car, how it's pinned to the ecu, and what model ecu you're using. Bone stock tunes are available with HP Tuners for the stock ecu - but I'm assuming you're here because it's running on a Link ecu? Quote Link to comment Share on other sites More sharing options...
kiwi-racer Posted June 27, 2023 Report Share Posted June 27, 2023 Hey @Beedub Drift - I need the same thing, did you find a tune ? (or make one !) Cheers Quote Link to comment Share on other sites More sharing options...
Hurtenstein Posted October 10, 2023 Report Share Posted October 10, 2023 +1. For G4X Xtreme though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.