chase.earle Posted November 10, 2023 Report Share Posted November 10, 2023 I have Storm G4+ and two CAN Lambda's. Storm has one set of CAN wires (one HIGH and one LOW). I have the CAN Lambda's wired in with Link's CAN Splitters, two of them because also have a Link Dash. The Storm can't recognize the second CAN Lambda. It shows a sporadic power issue, and all three share the same power source and the other CAN Lambda and the dash work fine. Any ideas? Quote Link to comment Share on other sites More sharing options...
Confused Posted November 10, 2023 Report Share Posted November 10, 2023 It can support up to 8 CAN Lambdas. Each one, out of the box, is configured as Lambda 1. You need to connect them only one at a time, to reconfigure the extras as Lambda 2, Lambda 3 etc, then finally, you can connect back the one you want as Lambda 1. Quote Link to comment Share on other sites More sharing options...
chase.earle Posted November 10, 2023 Author Report Share Posted November 10, 2023 Ok, I will try this, thank you And its ok to plug a CAN Splitter into another CAN Splitter to gain additional ways to plug in components? Quote Link to comment Share on other sites More sharing options...
Confused Posted November 10, 2023 Report Share Posted November 10, 2023 Yes, it is fine to use multiple splitters. Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 11, 2023 Report Share Posted November 11, 2023 Make sure you also only have 1 CAN channel set to CAN lambda in the CAN set up too, the one channel will receive data from all connected lambdas. If you have more than 1 channel assigned I have seen odd stuff happen. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.