Deklan Posted November 23, 2023 Report Share Posted November 23, 2023 Good morning, I reset my ecu to faxtory settings, however i believe this has wiped the setup that it came with from factory to suit my r34 gtt. Im hoping someone will be able to send me a copy of the stock settings for a r34 gtt? Thanks heaps. Deklan Quote Link to comment Share on other sites More sharing options...
koracing Posted November 23, 2023 Report Share Posted November 23, 2023 Did you not have a saved file of your calibration before you did the reset? Have you looked at the base maps provided in the software? There are stock R34 calibration files there you should be able to reference. Quote Link to comment Share on other sites More sharing options...
Deklan Posted November 23, 2023 Author Report Share Posted November 23, 2023 6 minutes ago, koracing said: Did you not have a saved file of your calibration before you did the reset? Have you looked at the base maps provided in the software? There are stock R34 calibration files there you should be able to reference. No, I didn't save anything as I was keen to start the setup from scratch to try and eliminate some problems I was having. Ill have a look for the calibration files, I haven't seen them before. Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 23, 2023 Report Share Posted November 23, 2023 I have attached our most recent one which has a few improvements from the older one that is currently in PC Link. You will need to use the G5 PC Link to open this one. Nissan R34 GTT G4X Xtreme Plugin.pclx Quote Link to comment Share on other sites More sharing options...
ae82ted Posted November 23, 2023 Report Share Posted November 23, 2023 You can't really start up the engine with the Link base map provided. As per my experience, you have to do timing sync correctly and you can fire it up. The base timing from the base map is far off. No matter R33 GTR/ R34 GTT/GTR. Can't really start the engine without timing sync. Quote Link to comment Share on other sites More sharing options...
Deklan Posted November 23, 2023 Author Report Share Posted November 23, 2023 2 hours ago, ae82ted said: You can't really start up the engine with the Link base map provided. As per my experience, you have to do timing sync correctly and you can fire it up. The base timing from the base map is far off. No matter R33 GTR/ R34 GTT/GTR. Can't really start the engine without timing sync. Thanks mate, I'll check that out also. I was having no luck getting it to fire up as well. Although, probably other issues as I couldn't get ignition to switch on, as well as ecu drops out everytime I crank it even with brand new batteries Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.