Guilty Garage Posted December 27, 2023 Report Share Posted December 27, 2023 Is there published info on what gets sent out where when "Transmit Generic Dash", "Transmit Generic Dash 2" and/or "Transmit Link AIM MSX Dash. I'm going to get a little creative with a bunch of status variables and warnings. While Link will let us broadcast multiple DBs at once, AIM will only let me receive 1 so I'm left to making the receive from scratch, it would be nice to not have to make the transmit from scratch too and just create what is lacking. Quote Link to comment Share on other sites More sharing options...
Guilty Garage Posted December 27, 2023 Author Report Share Posted December 27, 2023 Nevermind, I found it in PCLink Help. This is why you're so much better than Haltech Vaughan and Confused 2 Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 28, 2023 Report Share Posted December 28, 2023 Attached is a CAN template you can import into RS3 to start from. I usually just add another row on the bottom with a different ID to send any extras that arent in the standard stream, then in the ecu just send the normal "Transmit Link MXS", and a separate user stream for the extras. You will probably find lots of examples on the forum if you use the search at the top and search for "zconfig" or "xc1". LINK_Link MXS Custom_@20230318_005233_002523.xc1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.