Knock Sensor reccomendation for MR2 turbo with PNP

[OnegreatGuy]

Hello all, I would like to set up knock control with my MR2. I've been advised that the OEM knock sensor is close to garbage, and that I'd be better off switching to a flat response knock sensor, specifically a Bosch one. I'm curious if the mr2 PNP ecu is compatible with one of these sensors, and then what specific Bosch sensor I should get. The OEM knock sensor has a thread of M12x1.5, and a mounting surface of approximately 24mm in diameter. 

Thanks in advance!

[Adamw]

0 261 231 188 is common and cheap in most regions.  You can get a M8 stepped stud from Toyota that screws into the M12 hole and allows a knock sensor with an 8mm hole,  90126-08039 or 90126-08046.

[koracing]

I've tuned many turbo MR2s with the stock knock sensor just fine, or the common GM replacement sensor.