MartinT Posted February 22 Report Share Posted February 22 Hello, I have problems with the oil pressure sensor. I use the pre made wiring for the external map sensor for the oil pressure. It will not read the correct values. On the run time it reads 0,02V. I have checked the sensor(did try a new one). I have checked the pins on the connector. Any help? Quote Link to comment Share on other sites More sharing options...
Confused Posted February 22 Report Share Posted February 22 I've seen a few people recently pin these backwards, so I would double check you've connected it up correctly. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 22 Report Share Posted February 22 0V would suggest the wiring is wrong. Make sure it is wired like this: Be aware also, some of the aftermarket connectors have the cavities numbered incorrectly, one example below. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.