Wiring Crank Angle Sensor

[Mark Hamilton]

I'm about to start wiring a Toyota 2zz-ge for the G4 Storm and not sure about how to wire the Crankshaft Angle Sensor.  What type of unit does the 2zz have?  What voltage does it need 12, 8 or 5?

For that matter, what about the the cam sensors?

Cheers, Mark

[Scott]

Hey Mark,

I don't have any wiring diagrams or info on the on 2zz-ge cam and crank sensors. They are likely to be reluctor sensors. Perhaps someone else on the forum will have some info they can share.

Scott.

[Felix Kreysig]

They are reluctor type. You actually have 3 different connections. G22+ for cam angle, NE+ for crank angle and NE- which is the negative connection for both NE+ an G22+. For correct wiring take NE- from the ECU Side of the loom and wire it to 'Sensor Ground'. NE+ will go to Trig 1  and G22+ will go to Trig 2 . Unfortunately I am not sure regarding setup... I think its the same as for 3SGTE.

[Simon]

In the help file do a search for 1zz and it will give you all the setup info.