Trigger support for 3SZ-VE / K3-VE/K3-VET

[saifuladli]

Hi there..

Is there any plan for trigger support on Toyota/ Daihatsu 3SZ-VE/ K3-VE/K3-VET in the future?It would be nice to run these engine on Link ecu. On crank side is 36-2-2-2 & on cam side is 4-1. I've attached the picture of crank & cam signal for this engine.

Tosen takk.

[saifuladli]

Here is vvti cam signal

[Scott]

Thanks for the pictures, it appears that this trigger pattern is the same as the 4U-GSE (Toyota 86) and the Subaru EJ20 Quad AVCS.

The trigger pattern I recommend using is 'Subaru EJ20 Quad AVCS'.

Scott

[saifuladli]

thank you.. nice support!!!

[Sameh Yehia]

Hi what about the camshaft control ? how to get the k3-vet vvt mode working ? this car have dual vvt for both intake and exhaust.
Thanks. 

[Simon]

Do you know the pattern for the Exhaust cam?

There is the option in G4+ to enter custom CAM control figures if needed.

[Sameh Yehia]

here is picture of my cam seems exactly like the posted above..i didn't knock the engine works with vvt only on intake side..i been lazy and didn't look well..
how can i make it work in my link ecu ?

Thanks. 

[Sameh Yehia]

hello any update on this ?

Thanks. 

[Simon]

You should be able to control this engine by using the subaru EJ20 quad vvt for the trigger mode.

And then set the cam control vvt mode to 2GRFE (this also has 3 teeth spaced as per your pictures)