Bud Posted November 6, 2012 Report Share Posted November 6, 2012 Dear all I have one ECU Link plug in for Subaru v5 & V6. I use all sensor standard from subaru. I can not make MAP sensor calibration by the software. i have this error message : MAP SENSOR CALIBRATION COMMAND FAILED: CURRENT MAP inf 5KPA or sup 5KPA OF BARO READING. Can you help me? because i have delay when i check boost pressure Defi gauge and the on the link software. Regards Ludo  Quote Link to comment Share on other sites More sharing options...
Scott Posted November 6, 2012 Report Share Posted November 6, 2012 Hi Ludo, Two things you can check. 1. If you go to the AN Volt channel you have the MAP sensor on, make sure you have the right calibration selected. 2. Go to the Analog fault settings (at the bottom of the Analog Inputs section) and check the settings for the AN Volt channel you have the MAP sensor on. Typical values would be:   AN Volt X High: 4.95v   AN Volt X Low: 0.05v   AN Volt X Fault setting: 100 kPa. Cheers, Scott Quote Link to comment Share on other sites More sharing options...
Scott Posted November 6, 2012 Report Share Posted November 6, 2012 Hi again Ludovic, Which firmware version is your ECU running on? You can this out by looking under Help > ECU information Cheers, Scott. Quote Link to comment Share on other sites More sharing options...
Bud Posted November 6, 2012 Author Report Share Posted November 6, 2012 Dear Scott My firmware version is 4.9.1 Regards Ludovic Quote Link to comment Share on other sites More sharing options...
Simon Posted November 7, 2012 Report Share Posted November 7, 2012 Hi Ludovic Try using the V7-9 map sensor option and see if it will let you perform the calibration. Some of the later V6 models were fitted with the later map sensor. Quote Link to comment Share on other sites More sharing options...
Bud Posted November 14, 2012 Author Report Share Posted November 14, 2012 Hi Simon, I test with calibration V7-V9 map sensor. And it will be working and i can calibration with success Thank you in advance regrads Ludo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.