V8KILR Posted November 20, 2015 Report Share Posted November 20, 2015 (edited) I see that the new Link Thunder has 6 High frequency differential frequency or switching inputs suitable for ABS or turbo speed sensor.I would use them with my ABS if possible. Can you tell me the maximum frequency they can use please, so I can verify that they go to a high enough frequency. Edited November 20, 2015 by V8KILR Quote Link to comment Share on other sites More sharing options...
Simon Posted November 20, 2015 Report Share Posted November 20, 2015 6500Hz Quote Link to comment Share on other sites More sharing options...
V8KILR Posted November 20, 2015 Author Report Share Posted November 20, 2015 Thanks. As I have 48 teeth on my ABS trigger wheels, does that work out at a max wheel speed of 135 rps for reading the ABS signal? If so, using a 2.1m wheel circumference that works out at around a max of 1000 kmh, which should be more then enough. Quote Link to comment Share on other sites More sharing options...
Simon Posted November 23, 2015 Report Share Posted November 23, 2015 Yep should cover all wheel speed sensors nicely Quote Link to comment Share on other sites More sharing options...
mapper Posted November 23, 2015 Report Share Posted November 23, 2015 Simon can you elaborate the difference to the usual DI inputs found on the other ECU's, please. I think main difference is the much higher sampling rate of the differntial high frequenzy input, isn't it? Quote Link to comment Share on other sites More sharing options...
Simon Posted November 24, 2015 Report Share Posted November 24, 2015 Yep the frequency increase and that they are a differential input are the two differences.Being a differential input means they can piggy back the signal with out impacting the other device connected to the same sensor. Quote Link to comment Share on other sites More sharing options...
mapper Posted January 7, 2016 Report Share Posted January 7, 2016 How much HZ can a usual DI input measure?I want to connect a EFR Turbo Speed sensor to a Furry. Quote Link to comment Share on other sites More sharing options...
Scott Posted January 7, 2016 Report Share Posted January 7, 2016 500Hz is the max rate. Quote Link to comment Share on other sites More sharing options...
Typ17 16vg60 Posted January 6, 2018 Report Share Posted January 6, 2018 Hi @ all, Little late, but I hope I get a answer. Im this time set my extreme black in my car, a actually ask are, can I set the turbo speed (efr 6758 turbo) to an Di-in directly? I mean the sensor 5v measuring wire coming from the speed sensor. I now I have an 12blade compressor wheel.. Maybe anybody can help me And sry my English is bad Greetings Benny Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.