JohnRambo Posted January 22, 2016 Report Posted January 22, 2016 Hi Can a G4 gtslink use the stock knock sensors? I've had a look through the wiring diagram and pin outs and there is nothing for them so I'm assuming no thanks Quote
race jase Posted January 22, 2016 Report Posted January 22, 2016 All Links plug and play units use the stock sensors , you should be able to install the GTS link do a throttle and map reset then the car will start and idle if its all stock.Jase Quote
Scott Posted January 25, 2016 Report Posted January 25, 2016 Hi JohnRambo,Can you tell me your ECU serial number and which topboard version you have? You can find this out in PCLink by connecting to the ECU, clicking Help > ECU Information and looking at the ECU Type. Quote
Scott Posted January 25, 2016 Report Posted January 25, 2016 Hi again John,Thanks for messaging me the ECU details. Your top-board is a Storm top-board, which does not have support for internal knock control. It can only do knock control with an external KnockBlock module. Quote
JohnRambo Posted January 25, 2016 Author Report Posted January 25, 2016 Great just needed your confirmation.My rb had no knock sensors and was resistor'd out, so I'm just going to remove them now. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.