Serkan Posted February 22, 2016 Report Share Posted February 22, 2016 Hello,I was really used to using the fuel and ignition tables and graph views with the "reverse load axis" option ticked, however in the latest update 5.5.6.2942, the graph view cannot be reversed even if the option is ticked. Only the table view is affected.Also just noticed that toggling between fuel and ignition tables with the F and I keys does not toggle the graph view in the tuning page of the default layout.Just wanted to bring these issues to your attention, sorry if I've written i the wrong place or if there is a workaround that I was unable to notice.Thank you,Serkan Quote Link to comment Share on other sites More sharing options...
Simon Posted February 23, 2016 Report Share Posted February 23, 2016 Hi SerkanTo toggle the graph you will need to have it selected it will not follow the table.Currently its not an option to reverse the graph view but it is something the engineers are aware of. Quote Link to comment Share on other sites More sharing options...
Serkan Posted February 23, 2016 Author Report Share Posted February 23, 2016 Thank you very much Simon, greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Drty30 Posted February 29, 2016 Report Share Posted February 29, 2016 Hi Simon,There is also something strange happening when toggling between fuel and ignition maps with the F and I keys. One instance the higlighted map will toggle and others it will switch to secondary fuel map and other strange things. Quote Link to comment Share on other sites More sharing options...
TechDave Posted February 29, 2016 Report Share Posted February 29, 2016 By secondary fuel map, do you mean the surface plot? Quote Link to comment Share on other sites More sharing options...
Drty30 Posted March 1, 2016 Report Share Posted March 1, 2016 I actually mean when running dual maps. Using the F key will sometimes cycle between fuel map 1 and fuel map 2. Same goes for I. I'm also having trouble if i try to select another table, say for instance a boost control table while in the tuning tab it will replace the fuel map on the tab. Quote Link to comment Share on other sites More sharing options...
Simon Posted March 1, 2016 Report Share Posted March 1, 2016 When opening a new table to avoid it going in place of an existing table you need to use the shift key when you click on the table. It will then open a second table view on the page. Quote Link to comment Share on other sites More sharing options...
Scott Posted March 2, 2016 Report Share Posted March 2, 2016 Also if you want to lock a table/3D surface plot to a certain table (like fuel or ign) you can click the padlock icon in the top left of the view. Quote Link to comment Share on other sites More sharing options...
TechDave Posted March 2, 2016 Report Share Posted March 2, 2016 Also, also, Shift + F and F will cycle between active dual fuel tables, otherwise it will go to the active fuel table. Same story for the ignition tables. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.