rb ali Posted March 10, 2016 Report Share Posted March 10, 2016 hey, so I'm wondering and new to this (my 1st time with Linky) where do I get base maps ,do i just download . really want to make sure it starts before I get to dyno.. Need one for rb30det Quote Link to comment Share on other sites More sharing options...
JMP Posted March 10, 2016 Report Share Posted March 10, 2016 there's a ton of maps included with the pclink download package. If you've got an RB30DET instead of the VL motor you could use one of the GTR basemaps and modify it to suit your engine/trigger/ignition/injector combo Quote Link to comment Share on other sites More sharing options...
rb ali Posted March 10, 2016 Author Report Share Posted March 10, 2016 Thanx. Quote Link to comment Share on other sites More sharing options...
Adturb Posted March 13, 2016 Report Share Posted March 13, 2016 Once the engine is up and running confirm all of the inputs and outputs are working correctly- there were a couple incorrectly set in the base map for my car, so confirm it's set right before going too far with mapping! Quote Link to comment Share on other sites More sharing options...
rb ali Posted March 17, 2016 Author Report Share Posted March 17, 2016 OK. I am new as to this. Was planning to use a rb25de base map jus to make sure it would start and roughly idle on my 30 running a 25de head .. Would that not be the go. Just want to make sure everything is algud b4 I go to dyno Quote Link to comment Share on other sites More sharing options...
Scott Posted March 17, 2016 Report Share Posted March 17, 2016 Hi, Which ECU do you have?The Holden VL base-map and the Nissan GTS-GTR base-map both use the Nissan 360 Opto trigger mode, but they have a different 'ECCS Widest Slot' value. The Holden base-map has 9, while the Nissan GTS-GTR base-map has 24. When you get to the stage of setting up the triggers you can use the 'Test ECCS Sync' setting to determine which is correct for your engine.Whichever base-map you choose, it is likely the input and output layout will be different to how you have wired your ECU up. You will need to adjust the position of these to match your wiring. Quote Link to comment Share on other sites More sharing options...
rb ali Posted March 17, 2016 Author Report Share Posted March 17, 2016 I have the link g4+ plugin ecu . My engine is rb30det using a r32 25de head Quote Link to comment Share on other sites More sharing options...
Simon Posted March 18, 2016 Report Share Posted March 18, 2016 If you have the RB25 CAS then the skyline plugin map will be an ok point to start from. Quote Link to comment Share on other sites More sharing options...
rb ali Posted March 18, 2016 Author Report Share Posted March 18, 2016 Mint thanx for the help . save me hunits at the sparkys ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.