Jump to content

Plex uSDM interface


Recommended Posts

I've seen the new uSDM online and it looks like a great display to replace my gauge setup without dominating the dashboard. 

Is the G4+ going to have CAN protocol in place to work with it?

Edited by Adturb
Link to comment
Share on other sites

  • 1 month later...
  • 3 months later...

Hi Scott,

I have made up my own lead and plug for the uSDM, but I am really struggling to find THE pin out for my EvoLinkIX CAN Plugs- there is no info in the help file.

Looking at the following link http://www.vi-pec.com/techdata/accessories-manuals/can-catalogue I believe that I have used the yellow for CAN H (White on the lead, goes to pin 3 on the ALTW plug) and Blue for CAN L (Green on the lead, goes to pin 4 on the ALTW plug), hence I've ended up with the attached image. I have tried to swap the H and L wires on the off chance this was wrong, but still no comms. 

I have followed the PLEX instructions for setting up comms, but it's not talking!?


edit: I have subsequently found this thread http://forums.linkecu.com/index.php?/topic/1869-where-is-serial-connection/#comment-24947 so it looks like I DO have it correctly wired. Really would be a good addition to the excellent help file! 


Screen Shot 2016-08-21 at 17.23.24.png

Screen Shot 2016-08-21 at 17.26.20.png

Screen Shot 2016-08-21 at 17.26.38.png

Edited by Adturb
Link to comment
Share on other sites

Last edit- changed the ID from '1792' (which is specified for the 300 and 500 series) to '1000' and it's working! Only thing not displaying correctly is the Lambda, I suspect it's a math problem as the value is changing- but I'm sure my car isn't running 6-7AFR :) 


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...