Grant Baker Posted April 4, 2016 Report Share Posted April 4, 2016 Hi,Just about to install an Atom G4+ on a Nissan Micra K11 1.3 engine that's had a turbo fitted.There is no crank signal, only a cam reference signal... Also, only running a distributor.Any experience of which trigger to use? And also, I assume it's ok to run as-is? Quote Link to comment Share on other sites More sharing options...
Simon Posted April 5, 2016 Report Share Posted April 5, 2016 Hi GrantWe don't have any info on the 1.3 the only info I have is from the HR16DE which I think some of the Micra's had fitted.We will need to know what the pattern is from the sensor to know if its able to be used. A scope capture would be ideal as a starting point. Ducie54 1 Quote Link to comment Share on other sites More sharing options...
AbbeyMS Posted April 5, 2016 Report Share Posted April 5, 2016 Grant, we are just building a Micra K11 for a customer with a turbo fitted.can you post up a picture of the dizzy please , I think it will be very much like a RNN14 Pulsar Dizzy? thanks Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 5, 2016 Author Report Share Posted April 5, 2016 I'll grab a pic tomorrow. Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 7, 2016 Author Report Share Posted April 7, 2016 Screen grab of the cam sensor scope: Quote Link to comment Share on other sites More sharing options...
Simon Posted April 7, 2016 Report Share Posted April 7, 2016 HI Grant you might be able to use the Daihatsu Copen trigger mode. But be sure to change the sensor type to Opto/hallI'm assuming this is a 4 cylinder engine. Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 7, 2016 Author Report Share Posted April 7, 2016 This is a 4cyl yes.I'll try that. Do you think that it is likely it will be ok? Quote Link to comment Share on other sites More sharing options...
Simon Posted April 7, 2016 Report Share Posted April 7, 2016 Should be as the pattern is the same only difference being the sensor type.Its not the nicest of triggers as the res is so low but it works. Quote Link to comment Share on other sites More sharing options...
Grant Baker Posted April 8, 2016 Author Report Share Posted April 8, 2016 Thank you Simon.As always, Link ECU is king! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.