Skylinekrille Posted August 31, 2016 Report Share Posted August 31, 2016 (edited) Im trying to add more data to the stream, but at the moment i am stuck, im using Link G4 thunder, and i want to send the thermouple data 1 and 2 to the dash, ive checked the video on how to set up custom data frames and such, but i seem to missing something cause i get up very wrong numbers on the dash2pro, i have added a data stream, and added a frame inside, and put in the 2 thermocouple streams wich is 16bit wide, what im unsure of is the divider and offset, in the test calculator it says divider 10 and offset is 1000, here is where im stuck in the dash2pro setup i use the Exah1 and Exah2 and reconfigure them to the adress (1200) wich i set the CAN ID to in the LINK, and put in the first data starting from byte 0 to 15 and the other from from 16 to 31 and choose the Motorola seq for byte order, not sure if this it right either? and also put in 10 as scale and 1000 the dash displays very wrong numbers.so not sure what im doing wrong? Edited August 31, 2016 by Skylinekrille Quote Link to comment Share on other sites More sharing options...
Scott Posted September 1, 2016 Report Share Posted September 1, 2016 Hi,Would you mind uploading your ECU base-map and also your file from the Dash 2 Pro. I'll then take a look and try to determine the correct multiplier and offset. I'll then alter your ECU base-map and re-upload for you.Scott Quote Link to comment Share on other sites More sharing options...
Skylinekrille Posted September 1, 2016 Author Report Share Posted September 1, 2016 Sure no problem, here they are, tried some stuff so could look abit off at the moment.If its not to much trouble while your at it can you make streams for Internal Lambda 1 and 2 also?regardsChristian SupraLS.CMG SupraLS.pclr Quote Link to comment Share on other sites More sharing options...
Scott Posted September 2, 2016 Report Share Posted September 2, 2016 Hi Christian,I have modified your files. Try these and let me know if anything sensible shows up.Scott SupraLS - Mod.pclr SupraLS - Mod.CMG Quote Link to comment Share on other sites More sharing options...
Skylinekrille Posted August 22, 2017 Author Report Share Posted August 22, 2017 sorry for very late followup on this. It showed up some sensible, only thing thats wrong is the decimal, like it says 2450 degrees, when its 245, i tried to change some data, but im lost =) Quote Link to comment Share on other sites More sharing options...
Simon Posted August 22, 2017 Report Share Posted August 22, 2017 Scott made this vid which will help you out Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 23, 2017 Report Share Posted August 23, 2017 sorry for very late followup on this. It showed up some sensible, only thing thats wrong is the decimal, like it says 2450 degrees, when its 245, i tried to change some data, but im lost =)That's weird, looking at Scott's config it all looks ok to me but the easy fix will be to put a divider of 10 in the Link CAN stream like this: Quote Link to comment Share on other sites More sharing options...
Skylinekrille Posted August 23, 2017 Author Report Share Posted August 23, 2017 Thanks ill do that. Yeah ive watched the video but i never seemed to get the right data input/output myself. Going to try make a stream for lambda also Thansk again Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 23, 2017 Report Share Posted August 23, 2017 Lambda is already broadcast as part of the standard DASH2PRO stream: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.