S4-VR6 Posted October 18, 2016 Report Share Posted October 18, 2016 Hey Guys,I recently finished swapping a VR6 engine into my S4 and was able to successfully start and run the engine. While I was going through my second heat cycle and getting ready to drive the car out of the garage i noticed a rear main leak which brought the project to a temporary stop. I am getting ready to pull the engine now to fix the leak and wanted to reach out to the community to see if anyone had a base-map for a VR6 engine. although my engine was running i noticed my ignition table seemed to advancing the spark too much for its given ECT (in the range of 20Deg BTDC) causing a high idle, poor reving, and bad throttle response. I am sure I can adjust the ignition tables (and others) to get it to work but I was hoping to bypass the unwanted run/idle time associated with tuning these basic parameters. Ultimately i want to fix my oil leak, start it up, and break in my engine with a decent chance of success and not have to worry about backfiring, nock, poor driveability etc. Thanks! Quote Link to comment Share on other sites More sharing options...
nikiforosvr612vturbo Posted October 22, 2016 Report Share Posted October 22, 2016 hii have a golf 2 vr6 12v turbo.. with vipec v44please i want a base map ignition and fuel Quote Link to comment Share on other sites More sharing options...
Scott Posted October 25, 2016 Report Share Posted October 25, 2016 Hi guys,Unfortunately we (Link) have not done a VR6, so do not have a base-map to offer. Scott Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.