Kam Posted January 1, 2017 Report Share Posted January 1, 2017 (edited) Hi,I've been customizing the gauges in the PC Link software, all went good the way i like them to be, but when i exit and re-enter the software, the tacho & lambda gauges change and return to default layout !I tried on two separate laptops, but i get the same problem !On the tacho gauge, i set it to *1000 and only to show 1 decimal from 0 to 8 k , but when i re-enter the software it returns to showing 4 digits, like 1000 rpm instead of 1 Edited January 1, 2017 by Kam Quote Link to comment Share on other sites More sharing options...
Scott Posted January 5, 2017 Report Share Posted January 5, 2017 Hi Kam,Can you confirm the guage type you are using in PCLink? I'm guessing it is the dial gauge? Could you also upload a before and after screenshot showing the difference?Thanks,Scott. Quote Link to comment Share on other sites More sharing options...
Kam Posted January 6, 2017 Author Report Share Posted January 6, 2017 Scott 1 Quote Link to comment Share on other sites More sharing options...
Simon Posted January 9, 2017 Report Share Posted January 9, 2017 Hi we can replicate this on the bench.Engineering will apply a fix in a coming release. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.