Warchild Posted February 17, 2017 Report Share Posted February 17, 2017 Hi guysCould someone send me some configurations and some tuning advice on the VVT setup for the Subaru EJ20, specifically EJ207 motor if there is?Under my ECU Settings, VVT Control, VVT Setup I seem to have the defaults in there.Cam control mode is Subaru AVCS EJ20.PID Setup default, RPM lockout is 1500rpm, ECT Lockout is 20, Inlet and Exhaust Centerline display is off, Active inlet and exhaust table is set to 1 tableThe actual place where I seem to need settings is the VVT Inlet target table, which is 0 all round the while table, which is surely the most retarded (safest) position.Many thanks in advance Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted February 17, 2017 Report Share Posted February 17, 2017 Have you looked at any of the base calibrations that are included in the software download?I know the v7-9 and v10 Subaru cals have good starting points for the avcs Subaru engines. Quote Link to comment Share on other sites More sharing options...
Warchild Posted February 20, 2017 Author Report Share Posted February 20, 2017 Hi there! Like I stated, I do not have any default values, my values are all 0. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 20, 2017 Report Share Posted February 20, 2017 Just as Brad suggested the base maps supplied with PCLink are populated with numbers that should be a reasonable starting point for a stock engine.Here is the table in the V10 map: And here is the V9: And the V8: Quote Link to comment Share on other sites More sharing options...
Warchild Posted February 20, 2017 Author Report Share Posted February 20, 2017 Hi, so sorry, My tables are 0 ?? So weird. I have a STI V7 to configure, can I use the V8 VVT, they are similar ? SF4AB 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 20, 2017 Report Share Posted February 20, 2017 You are right, I just found the V7 map has a zero'd table in it? Yes, use the V8 table. Note there is an import/export function in the software so you dont need to type this in manually. Quote Link to comment Share on other sites More sharing options...
Warchild Posted February 20, 2017 Author Report Share Posted February 20, 2017 LOL, Glad it is not just mine ! Many thanks, will do ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.