Jump to content

How to connect interface OBD2?


Rosello
 Share

Recommended Posts

Hi Rosello.

No you do not need to connect to the ECU ground.  The 12V and GND is only needed to power the wifi device, it is not needed for communication.  It looks to me like your problem is you have used the USB tuning port, not the CAN port.

 

sm0KIaz.png

Link to comment
Share on other sites

  • 2 weeks later...

"No you do not need to connect to the ECU ground.  The 12V and GND is only needed to power the wifi device, it is not needed for communication.  "

 

Are you sure?because look it's write "connect to ecu signal ground"

 

99480920170308003432.jpg

Edited by Rosello
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...