MAGNUM85 Posted July 6, 2017 Report Share Posted July 6, 2017 Greetings all,I am currently wiring a 6 cylinder m50b20 with 153624 firing order, to a link G4+ storm "blue one" what would be the best wiring for ignition, injection?what is did is 153 to inj port 1 and 624 to inj port 2 and did put 2 ignitors to every three coils.setup multiport with 1-2 INJ ports and 1/2 injection cycle.Is there anything better to do ? shall I used coils with built in ignitors? Recommendations highly appreciated Quote Link to comment Share on other sites More sharing options...
Simon Posted July 10, 2017 Report Share Posted July 10, 2017 Do you have a cam input for trigger 2? Or only the crank sensor Quote Link to comment Share on other sites More sharing options...
MAGNUM85 Posted July 10, 2017 Author Report Share Posted July 10, 2017 Only crank sensor trigger two not available Quote Link to comment Share on other sites More sharing options...
Simon Posted July 10, 2017 Report Share Posted July 10, 2017 In that case you are correct for the injection wiring.The coils will need an igniter channel per coil and you will pair the input to the igniters to suit the firing order.I would run the injection rate at 1 / cycle. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.