Jump to content

TT Plugin Boost Switch


jannerboy
 Share

Recommended Posts

Hi, 

We have added a switch to DI9 Pin 112 and Sensor Earth Pin 27. However when switching we find in one position the system is active but in the other it flashes (switches) itself on/off continuously.

Any ideas? We have set this up on other cars before so something is amiss.

Pictures attached of our setup.

Regards, John

Screenshot_20170809-165914 (Small).png

Screenshot_20170809-165953 (Small).png

Link to comment
Share on other sites

The next test will be to measure the voltage at the Di9 pin with a volt meter.

The Di activation voltage is 1.5V so if the measured voltage is close to this then the DI could toggle.

One option is to use a 12V in and have the internal pullup off.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...