AlexLSX7 Posted August 30, 2017 Report Share Posted August 30, 2017 Hi Guys,Why cant i turn on INJ driver 7 and 8, and also Ignition Drive 7 is assigned to EThrottle Relay 1 and Ignition Drive 8 is Engine Fan 1 which i also cant change.I have an LS3 V8 so wanting to use Direct injection and ingnition if possible with EThrottle (the reason i bought the Xtreme). What do i need to do to get this sorted? I just loaded the sample Xtreme G4+ map and started configuring it how i needed, maybe that is the issue? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 30, 2017 Report Share Posted August 30, 2017 You will need to go live with the ECU and set the cylinder count to 8. If you are then on direct spark and sequential fuel it will force the drives to the correct settings.In the map you are working on it was form a 6 cylinder application and so those drives were free to be used for other functions. AlexLSX7 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 31, 2017 Report Share Posted August 31, 2017 Just in case you dont yet have a live ECU to connect to, attached is a Xtreme Base map that I have loaded into a ecu and enabled all 8 ign/inj drives. I have also turned off some of the irrelevant stuff like gear shift control and VVT etc. G4+ Xtreme Black V8 Sample.pclr AlexLSX7 1 Quote Link to comment Share on other sites More sharing options...
AlexLSX7 Posted August 31, 2017 Author Report Share Posted August 31, 2017 Thanks guys.I havent got it wired in yet so have just been setting up a base map, so that will be very handy, thanks Adam.I can still use E-Throttle right? Quote Link to comment Share on other sites More sharing options...
Simon Posted August 31, 2017 Report Share Posted August 31, 2017 Yes E throttle is fine. Quote Link to comment Share on other sites More sharing options...
AlexLSX7 Posted September 4, 2017 Author Report Share Posted September 4, 2017 Awesome, thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.