Howard Coleman Posted November 4, 2017 Report Share Posted November 4, 2017 after working fine until today all i get is white space where my Log Analysis should appear. i believe i have tried just about everything. after clicking on and calling up a specific log in spite of seeing a blank white space i am able to do a Mixture Map and Navigator. the Parameters appear. also, my two Knock Sensors (newer style Bosch 2 rotor motor) stopped generating anything but zeros a couple of days ago. since each stopped at the same time i am concerned that something malfunctioned in my V88. settings have been verified "Internal" would greatly appreciate any suggestions. Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 4, 2017 Report Share Posted November 4, 2017 Post a log and your map and I will take a look. Can you give more detail about your problem "all i get is white space where my Log Analysis should appear". Do you mean the time plot and other logging views are missing - or are the views still there just no data showing? Quote Link to comment Share on other sites More sharing options...
Howard Coleman Posted November 5, 2017 Author Report Share Posted November 5, 2017 Thank you for your reply. i tried to post a jpeg of the screen unsuccessfuly however it is easy to describe. Logging 1 page is entirely blank. no time data, absolutely nothing but white. when i right click on it i get "New View." with a number of options starting w Run Time Value List, which leads to Run Time Value List Properties. other items are Digital Gauge etc. if i go back to Logging and click Play and look over at my Parameter List i see all the data moving but nothing but white on the Logging part of the page. my V88 has worked fine (love it) and this is something that just happened Friday. i have attached a log Log 1-11-17 3;22;45 pm.llg Quote Link to comment Share on other sites More sharing options...
Howard Coleman Posted November 5, 2017 Author Report Share Posted November 5, 2017 all of my logs dating back to 2013 come up as blank/white. Quote Link to comment Share on other sites More sharing options...
Howard Coleman Posted November 5, 2017 Author Report Share Posted November 5, 2017 i connected my laptop to the V88, turned the key on and did a log. i was able to generate a log and save it to my files. i can generate a Mixture Map and Runtime Values... the only thing not seeming to work is seeing the log on my screen. nothing but blank white space. Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 6, 2017 Report Share Posted November 6, 2017 You log works ok for me so it sounds like you have possibly deleted some of the views from your layout. I dont know how customized you layout was but I will attach copies of the default ones. You can place these into this folder: C:\ViPEC\VTS V2\Layouts DefaultLayout.llf DefaultLoggingLayout.llf Quote Link to comment Share on other sites More sharing options...
Howard Coleman Posted November 6, 2017 Author Report Share Posted November 6, 2017 THANK YOU ADAM! i don't know what i did to delete the log view but your new Layout solved my problem. i wish you a wonderful Monday:) do you have any ideas as to why my Knock readings are zero from both sensors? previously they were reading fine. i have two late model Bosch sensors and am of course running Link/Vipec internal. thank you, Howard Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 6, 2017 Report Share Posted November 6, 2017 Can you attach your Map so I can take a look. Quote Link to comment Share on other sites More sharing options...
Howard Coleman Posted November 6, 2017 Author Report Share Posted November 6, 2017 map attached. yellowstone 14.pcl Quote Link to comment Share on other sites More sharing options...
Simon Posted November 6, 2017 Report Share Posted November 6, 2017 Hi Howard Looking at the map I think the issue is that you have Cyl1 and 2 Knk Level Gains at 0 I would put these at 1 and adjust as required to get suitable levels and even across the cylinders. Regards Simon Quote Link to comment Share on other sites More sharing options...
Howard Coleman Posted November 7, 2017 Author Report Share Posted November 7, 2017 THANK YOU SIMON! changing the Knock Gain to "1" re-enabled my readings. i don't recall how it changed from "1" but i now will know where to look if it happens again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.