Pointz Posted July 23, 2018 Report Share Posted July 23, 2018 New to standalone ecu's so bare with me please. It is going to a tuner for a full map but would in an ideal world like to at least start it so i can check everything before wasting the mapper's time trailoring it there and it not run! Car is an s13 with ca18det, forged engine (Just built) using a Link g4+ atom 2 wire-in. 1000cc id injectors Holset turbo oem cas oem TPS MAP & IAT sensor Will also be hooked up to my innovate wideband. Would it be safe to get a base on the ecu just for startup? What size fuses are required also for- ECU, Fuel pump, coils. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted July 23, 2018 Report Share Posted July 23, 2018 The s13 base cal in the software should be good enough to get you moving with some small adjustments. Adamw 1 Quote Link to comment Share on other sites More sharing options...
Pointz Posted July 24, 2018 Author Report Share Posted July 24, 2018 9 hours ago, Brad Burnett said: The s13 base cal in the software should be good enough to get you moving with some small adjustments. Cheers Brad, safe enough for a 1st start on new build engine? Guess the wideband should help with self learn. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 24, 2018 Report Share Posted July 24, 2018 25 minutes ago, Pointz said: Cheers Brad, safe enough for a 1st start on new build engine? Guess the wideband should help with self learn. Check all sensors are calibrated and reading correctly. Check the base timing as per the help file. Adjust Fuel master until it runs reasonable (or until your wideband reads ballpark normal), that is all you should need to do to get it running ok. Quote Link to comment Share on other sites More sharing options...
Pointz Posted July 24, 2018 Author Report Share Posted July 24, 2018 1 hour ago, Adamw said: Check all sensors are calibrated and reading correctly. Check the base timing as per the help file. Adjust Fuel master until it runs reasonable (or until your wideband reads ballpark normal), that is all you should need to do to get it running ok. Thank you. Just need to know what size fuse the link requires and coilpacks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.