DEVIN Posted September 1, 2018 Report Share Posted September 1, 2018 HELP PLEASE!!! I have a Aem UGO Wideband that is currently setup on ANVolt 4 it is currently working but it reading only Lambda. I have all my settings to read AFR on both metric and Imperial but it still Reads Lambda/sensor Volt in my logs I have the Gauge setup per instructions and still no luck. Any help would be Great Thanks, Devin Quote Link to comment Share on other sites More sharing options...
Ducie54 Posted September 1, 2018 Report Share Posted September 1, 2018 Can you post a map. Also from memory if your running modelled multi fuel it will only read lambda. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 1, 2018 Report Share Posted September 1, 2018 A couple of possibilities. As Ducie54 says, if you are using flex fuel (multifuel mode) we only let you use Lambda, this is because AFR is not going to make much sense to anyone when the fuel stoichiometric ratio is variable. Another common thing I see is where a user chooses the wrong parameter for their gauge or display. If for instance you use parameter "AN Volt 4 - Lambda 1", instead of just "Lambda 1", the unit conversion wont work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.