Jump to content
EvilEvolution8

CAN to OBD2 on Evo 8

Recommended Posts

Hello Guys,

I need to wire the CAN2 of my Thunder to stock harness of Evo 8 (to use the stock OBD2 port).

The Evo 8 pinout says PIN62 and PIN79 are diagnostic ... which one I should user for CAN Lo and CAN Hi?

 

Thanks

Share this post


Link to post
Share on other sites

The Evo 8 didnt have a CAN bus from the factory, Im pretty sure it uses a single wire K-line type protocol, so it will not have suitable wires already in the harness.  Since CAN needs to be twisted pair wires you will be best to run two new wires from the ECU to the OBD2 socket.

Share this post


Link to post
Share on other sites
8 hours ago, Adamw said:

The Evo 8 didnt have a CAN bus from the factory, Im pretty sure it uses a single wire K-line type protocol, so it will not have suitable wires already in the harness.  Since CAN needs to be twisted pair wires you will be best to run two new wires from the ECU to the OBD2 socket.

Ok Adam, thanks a lot ;) 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...