ls joker
-
Posts
27 -
Joined
-
Last visited
Reputation Activity
-
ls joker got a reaction from Synthstain in CAN Wideband into G4X StormX
To add to that, you will need a certain connector to plug onto your board. Should also utilize a 120ohm terminating resistor on the device end
-
ls joker got a reaction from Grant_Honed in honda eg b18 with honed development trigger kit
Grants,
Thanks man. Good to see your involvement on here aswell. The quality on this product is so great. I havent been excited for a new part since changing to my gtw3476r turbo. My only recommendation would be to clock the home sensor mounting pad facing the opposite direction. Towards the firewall, instead of towards the radiator.
That being said install was pretty simple. Wiring was pretty simple aswell. I made a separate harness. Will have to get pics up.
-
ls joker got a reaction from Hadzhonda in honda eg b18 with honed development trigger kit
Glad this was bumped. Purchased the trigger kit aswell. Just need alittle help from g4x technical support on, if i can wire the power source direct to pin a25 on the ecu? Or if it needs to be on a switch power source? Switched power source is suppose to be 12v. And pin a25 would be 14v since the alternator isnt being controlled anymore. Would that mean the whole system would be at 14volts long as the alternator is functioning properlly correctly?
I made a separate sub harness for the trigger sensors that will be pinned in B-pins.
