Gsab Posted April 29, 2020 Report Share Posted April 29, 2020 Bought a set of DW 1000cc fuel injectors, setting up the modeled fuel equation. The injectors are tested at 3 bar and test flow is 711cc. What do I input to the ecu the 711 cc or as advertised at full flow1000cc`s ? Trying to get my head around this all. Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted April 29, 2020 Report Share Posted April 29, 2020 start with inputting 711cc at 3 bar. There is a setting for the pressure at which the flow value was derived. I always find that the actual flow value will need a small amount of massaging one way or the other to achieve optimal results. Quote Link to comment Share on other sites More sharing options...
Gsab Posted April 29, 2020 Author Report Share Posted April 29, 2020 Thank you Brad, appreciate the info. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 29, 2020 Report Share Posted April 29, 2020 Whats the partnumber? It seems very odd for an injector that is advertised as 1000cc to only flow 711cc. The advertised flow rate is usually quoted at 3bar except for GM injectors which are usually quoted at 4bar. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.