AliB Posted August 31, 2021 Report Share Posted August 31, 2021 Can anyone please give any information on this ECU also after a hand controller if anyone can sell me one or rent me one unless this m ecu is laptop tunable sorry someone has removed the sticker from the socket so this is all I have to identify it Quote Link to comment Share on other sites More sharing options...
neil brown Posted August 31, 2021 Report Share Posted August 31, 2021 Possible Subaru impreza ver 1 and 2 Possible tuning only by hand controller as no markings on chip Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 1, 2021 Report Share Posted September 1, 2021 I will invite some wisdom from @Simon, just in case there are some clues that im not aware of - but suspect the capability of PC tuning will be unknown without the firmware sticker. Quote Link to comment Share on other sites More sharing options...
Simon Posted September 7, 2021 Report Share Posted September 7, 2021 The lack of the sticker is likely to make it pre PC Tuning. Only way to know for sure will be with a hand control to check the firmware. Quote Link to comment Share on other sites More sharing options...
AliB Posted October 28, 2021 Author Report Share Posted October 28, 2021 I found a hand controller and here's some info its plugged into my version 2 EJ20 and runs just want to know more about it Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 29, 2021 Report Share Posted October 29, 2021 Not much more info to give really. It is the road car firmware version so doesnt have motorsport functions such as antiag or launch. Hand controller tuning only. The user manual here should mostly apply, with the exception of laptop connection, and in your one the fuel values are probably in % rather than absolute as the later ones were: https://forums.linkecu.com/applications/core/interface/file/attachment.php?id=2529 Quote Link to comment Share on other sites More sharing options...
AliB Posted October 29, 2021 Author Report Share Posted October 29, 2021 I heard antilag could be added to the ecu by removing another function is this correct? Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 29, 2021 Report Share Posted October 29, 2021 I dont know much about the antilag strategy that they used in these when requested - but to enable it it would need a new microprocessor burnt with different firmware. That is a fairly expensive update and not worth it in my opinion for such a dated machine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.