k fuku Posted February 24, 2023 Report Share Posted February 24, 2023 I would like to have separate water temperature conditions for the start of LTFT and STFT operation. For example, STFT is activated at a water temperature of 20°C or higher, while LTFT is activated at a water temperature of 80°C or higher. Quote Link to comment Share on other sites More sharing options...
essb00 Posted February 25, 2023 Report Share Posted February 25, 2023 Ummm... You're supposed still to have warm-up enrichment up to 70°C. While any warm-up enrichment is still active, any fuel corrections would be counter intuitive. k fuku 1 Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 26, 2023 Report Share Posted February 26, 2023 There is a "user lockout" setting for LTFT coming in the next release, so you could use a GP output to set whatever conditions you like for disabling it. This lockout will disable both the learning functionality and the trim. k fuku, RyanG and essb00 3 Quote Link to comment Share on other sites More sharing options...
k fuku Posted February 28, 2023 Author Report Share Posted February 28, 2023 On 2/26/2023 at 6:50 PM, Adamw said: There is a "user lockout" setting for LTFT coming in the next release, so you could use a GP output to set whatever conditions you like for disabling it. This lockout will disable both the learning functionality and the trim. That is very gratifying. We appreciate it. Quote Link to comment Share on other sites More sharing options...
RyanG Posted March 8, 2023 Report Share Posted March 8, 2023 On 2/25/2023 at 9:42 PM, essb00 said: Ummm... You're supposed still to have warm-up enrichment up to 70°C. While any warm-up enrichment is still active, any fuel corrections would be counter intuitive. Not if you have a lambda target offset vs ECT. Then it would be beneficial to have STFT to meet target, but obviously we don't want this throwing off LTFT's that are well dialed from regular driving. Timboj 1 Quote Link to comment Share on other sites More sharing options...
Timboj Posted June 27, 2023 Report Share Posted June 27, 2023 On 2/26/2023 at 8:50 PM, Adamw said: There is a "user lockout" setting for LTFT coming in the next release, so you could use a GP output to set whatever conditions you like for disabling it. This lockout will disable both the learning functionality and the trim. Hi @Adamw I was about to add the same thing to the wishlist, but thought I'd do a quick search first. What's the ETA on this release? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.