semih Posted March 14 Report Share Posted March 14 hi, i'm using haltech wb1 with my g4x, i guess lambda sensor goes(reading about 6 at wot) bad and i want to change it haltech wb1 came with 0258 017 169(5 wire) numbered bosch sensor i want to use 0281 004 821(6 wire) does it matter whether the sensor has 5 or 6 wires, as long as there is a resistor in the socket? Regards, Semih Quote Link to comment Share on other sites More sharing options...
atlex Posted March 14 Report Share Posted March 14 according to the diagrams I get off parts sites, the 258 017 169 *is* a six wire one. and 0281 004 821 is also a six-wire one, since it's an LSU4.9 ? what's the missing wire ? the resistor has to be there for it to have calibration. They both appear to have the same connector, at least based on parts diagrams. I'd just try it and see. If one of them really only has 5 pins, it may be damaged ? Quote Link to comment Share on other sites More sharing options...
dx4picco Posted March 14 Report Share Posted March 14 It has 6 pins but 5 wires because the calibration resistor is in the plug itself Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 15 Report Share Posted March 15 The only difference between those two sensors is the length of the cable. semih 1 Quote Link to comment Share on other sites More sharing options...
semih Posted March 15 Author Report Share Posted March 15 Thank you Adamw, i found 0258 017 169(vag groups are using oem like vw tiguan audi q3 etc.), but i guess it will be break down too lol then i'll try another one Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.