BlakeR33 Posted March 31 Report Share Posted March 31 Hello, I would like to use both CAN Lambda and have an extension loom to control two fan relays. Unfortunately the factory fans are controlled over CAN and with my setup I'd need a analogue way of triggering the relays. Is that possible with this ECU, I believe I already have the Can JST cable plugged into the ecu? Thank you. Quote Link to comment Share on other sites More sharing options...
koracing Posted April 1 Report Share Posted April 1 It appears according to the help menu you have two 8 pin epansion plugs on the board as well with one of them having 3 aux outputs suitable to ground the trigger side of a relay to control your fans. You'll need the XSL expansion loom for G4+/G4x plug-in ecus pn 101-0106. Quote Link to comment Share on other sites More sharing options...
Timboj Posted April 3 Report Share Posted April 3 Beware: Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 3 Report Share Posted April 3 You could use Aux 6 & 7 at the ecu header or already in the engine bay in the O2 sensor plugs, or if it is the non up-rev model with only intake VVT then you will also have Aux 3 & 5 spare at the ecu header. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.