gabe1 Posted July 30, 2015 Report Share Posted July 30, 2015 Hi there, Iv just got a new G4 extreme for my 1uzfe non vvti stock engine atm.Has anyone got a basemap for this? Any help would be greatly appreciated.Thanks Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted July 31, 2015 Report Share Posted July 31, 2015 (edited) Hi Gabe1,I have attached the available configuration for the 1 UZFE from the HELP files.As for a start file I do not have one, sorry.Let us know if you need help with anything else.RegardsDave. Edited July 31, 2015 by Dave Kriedeman Quote Link to comment Share on other sites More sharing options...
gabe1 Posted August 4, 2015 Author Report Share Posted August 4, 2015 All going well engines running ect. One issue im having is that the map sensor wont calibrate.To set it so it is right i have to use MAP-EZ30 avcs Which gets me to 101kpa at sea level (ruffly)Iv tryed calibrating with a 3 bar map sensor and a toyota style one.Is this a common issue? leave it on this map setting?Thanks guys loving the ecu just need my wideband interfaces to work for me (banging my head on the wall) Quote Link to comment Share on other sites More sharing options...
Simon Posted August 4, 2015 Report Share Posted August 4, 2015 What map sensor are you using with the ECU? Quote Link to comment Share on other sites More sharing options...
gabe1 Posted August 4, 2015 Author Report Share Posted August 4, 2015 Thanks for the fast replyIv got the gm 3 bar on there atm.Cheers Quote Link to comment Share on other sites More sharing options...
race jase Posted August 4, 2015 Report Share Posted August 4, 2015 You should be able to set it up as a 3 bar map sensor,Are you sure your wiring is correct? Quote Link to comment Share on other sites More sharing options...
gabe1 Posted August 4, 2015 Author Report Share Posted August 4, 2015 100% on the wiring race jase Quote Link to comment Share on other sites More sharing options...
Brad Burnett Posted August 4, 2015 Report Share Posted August 4, 2015 If the map sensor reading is more than 10 or so Kpa off from what the internal baro is reading it will not calibrate.Try selecting different sensors in the list until you get one that is close to the baro reading then calibrate. Quote Link to comment Share on other sites More sharing options...
gabe1 Posted August 5, 2015 Author Report Share Posted August 5, 2015 thanks brad have done so. Subby one seems to work so will go with that....All on hold atm as my wide band controller has packed a sad.Thanks for the help guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.