Jump to content Table issue


Recommended Posts

Just sat down to do some new configuration and found a new bug in the new firmware.

Have not tried all but Calibration Tables 7-10 are having weird axis issues.

Try and set them up and they automatically scale nicely. Try and set the values manually and you get errors saying values too big (over 0) or too small (under 0).

Link to comment
Share on other sites

If limiting on Fuel only the limit will not activate if the Inj DC is over 100%.

It is not often an issue as one should never be running an engine with the injectors going over 100%. If this is the case the injectors are too small or there are other fuel supply issues.

There is a fix coming.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...