Jump to content

Link Canbus Lambda connection to PnP S15 ECU


Recommended Posts

The Nissan PnP's have a built in canbus resistor ( normally 1 for 1 end of the canbus trunk, so can we get away when just adding 1 item to the canbus without making a canbus trunk ended with resistor? Would make running the excellent Link cambus lambda a lot easier and quicker.




Edited by AbbeyMS
Link to comment
Share on other sites

Some say a CAN bus will often work without termination if the bus is less than about 1 meter long.  Personally rather than trial and error I would just do it right in the first place and just fit a resistor.  You will probably waste more time chasing a CAN error than you will connecting a resistor.  You can usually even crimp them straight in to the same main connector.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...